Truck will not start. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MalibuSSwagon · 12-03-2010, 05:01 PM

So I was doing a bit of welding today on my trailer, BUT I forgot to disconnect the light plug between the truck and trailer. Now the truck will not start, is it possible that I blew the fuseable links or any under dash fuses with feedback from the welder? I checked the battery voltage,its fine. I have not had a check to check for voltage at the starter. Issue is, it just clicks once when I turn the key. It is a year old Autozone starter that has hot start issues.

Any thoughts? A diagram so I can check the voltage at the starter later?

12-03-2010, 05:01 PM	#1
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Truck will not start. So I was doing a bit of welding today on my trailer, BUT I forgot to disconnect the light plug between the truck and trailer. Now the truck will not start, is it possible that I blew the fuseable links or any under dash fuses with feedback from the welder? I checked the battery voltage,its fine. I have not had a check to check for voltage at the starter. Issue is, it just clicks once when I turn the key. It is a year old Autozone starter that has hot start issues. Any thoughts? A diagram so I can check the voltage at the starter later? __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.