KS Parchment Door Panels F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 01-02-2011, 06:36 PM

Pulled these from the '70 3/4ton Chevy. Do have a couple issues but would work fine for a daily driver. Pass. panel has slight tear but should be able to glue with vinyl adhesive. Driver panel has circular split by the lower front screw mounting area. Very slight discoloring below window crank area, not very noticeable when installed. Not sure it show well in the picture. Couple vinyl splits on edges that do not show when installed. Wood grain is fine with no gouges. Back sides do have some minor rust but none serious. $40 for the pair plus shipping.

01-02-2011, 06:36 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,342	Parchment Door Panels F/S Pulled these from the '70 3/4ton Chevy. Do have a couple issues but would work fine for a daily driver. Pass. panel has slight tear but should be able to glue with vinyl adhesive. Driver panel has circular split by the lower front screw mounting area. Very slight discoloring below window crank area, not very noticeable when installed. Not sure it show well in the picture. Couple vinyl splits on edges that do not show when installed. Wood grain is fine with no gouges. Back sides do have some minor rust but none serious. $40 for the pair plus shipping. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 03-22-2011 at 08:51 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.