|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
01-06-2011, 04:06 AM
|
#1 |
|
yes, i do
Join Date: Jun 2007
Location: Spokane, wa
Posts: 2,734
|
question on engine hoist hydrolic ram
ok so the last couple times i used my hoist it has acted like it either needs more oil or needs to be bled. so everytime i pull the ram off the hoist itself and pump it with the relief valve open to bleed the air out and then it works, but once i let the load down i need to bleed the ram again before i can use it again. and the first time it happened it appeared to be low so i serviced to the bottom of the cylinder fill plug. so i know i'm good on oil. and there aren't any leaks. so what should i be looking to do?
__________________
ERROR 404....... SNAPPY COMEBACK NOT FOUND  _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900 |
|
|
| Bookmarks |
|
|
Threaded Mode