Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-08-2011, 12:25 AM | #1 |
Registered User
Join Date: Apr 2007
Location: Elk Grove, CA
Posts: 375
|
A couple of wiring Questions??
I am putting a 6.0 in my 64 C10 and I converted the harness from DBW to DBC. I am just about ready to finish it all up, but I have a couple questions..
1. I have a 4L65E and want to hook up the purple brake switch wire. Does anyone have a diagram for this? Can I just tap it right into my stock brake switch? 2. There is a Purple wire labeled "Crank Volt" in my pinout, it is pin 59 on the Red/Green connector. Does anyone know what this is for? It is a thin gauge wire like the rest, so I don't think it's the starter wire. 3. Lastly, I know that the pre 65 ignition switch does not supply constant 12V to the "ignition hot" during cranking. Does anyone have a suggestion on which ignition I should get that would fit in my stock dash location? Can I just buy one for a 66? Thanks for looking and any help you guys have to offer!!!
__________________
1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again) Last edited by skoffice; 01-10-2011 at 01:18 AM. |
Bookmarks |
|
|