Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-26-2011, 09:38 PM | #1 |
Registered User
Join Date: May 2009
Location: Houston, TX
Posts: 155
|
tps and app question HELP!!! im confused
are the readings for the TPS-throttle postion sensor and the APP-accelerator pedal position sensor, should they be similar at all times??
my 07 tahoe 5.3L, got a code and check engine light is on, so i hookd up the ethos scan tool and i got code for tps and or app. so i monitored the readings for both. truck is drive by wire. i noticed that the APP reading changes accordingly as i press and release the gas pedal, from 0 to 100% on the other hand the TPS reading stays at 25% and when i press the gas pedal it goes accordingly up to 100%. tps lowest reading is 25% and sometimes 18%. at idle tps lowest reading with the truck off is 23%. shouldnt my tps reading move according to my gas pedal from 0% to 100%?? im thinking the TPS is bad, but then again im also thinking shouldnt it be over 0% at the tps cuz otherwize it wouldnt stay on at idle, am i right or am i just thinkin too much into this?? im usually hiding out int he squarebody section. LOL |
Bookmarks |
|
|