74 fr. suspension/cradle in a 67, mounts work ok

[peglegs]

#1
When removing the 67 suspension/cradle it was noted that the engine needed to be supported if so how would this best be accomplished?

It was also noted that the engine mounts could be unbolted at the cradle only, the way i understood it, and the engine would be supported still bolted to the mounts that way? Is this ok?

#2
What is the measurement from wheel mounting surface to wheel mounting surface of the 67 front end? The 74 is 64" wide

#3
i was said that 74 suspension is 1 1/2" wider would this effect the handling, braking etc. at all.