did the dash wiring in my truck today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1tonchevy · 03-01-2011, 01:09 PM

was finaly warm enough to tear my dash apart and put the new harness in everyhting sees to work ok but a few little things.

-head lights don't work now?
-oil press guage is pegged wide open?
-some of the cluster lights work some don't tested the bulbs an most of the ones that "don't work" acutally do work?

Other than these little things i'm super pleased with the truck now that i have guages that work!

Any help would be great!

Just took a look at the printed circuit there is a break in one of the prints (it goes to a light bulb but near the oil press guage) might be the prob will look more into it.

also my light switch is broken (the piece inside and the housing) going to get another one tomoro.

03-01-2011, 01:09 PM	#1
1tonchevy C35 Crew Dually Join Date: Nov 2008 Location: Belleville Ontario Posts: 1,116	did the dash wiring in my truck today was finaly warm enough to tear my dash apart and put the new harness in everyhting sees to work ok but a few little things. -head lights don't work now? -oil press guage is pegged wide open? -some of the cluster lights work some don't tested the bulbs an most of the ones that "don't work" acutally do work? Other than these little things i'm super pleased with the truck now that i have guages that work! Any help would be great! Just took a look at the printed circuit there is a break in one of the prints (it goes to a light bulb but near the oil press guage) might be the prob will look more into it. also my light switch is broken (the piece inside and the housing) going to get another one tomoro. __________________ If it aint square, I don't care. 84 C35 CC Dually Project log... http://67-72chevytrucks.com/vboard/s...d.php?t=414892 Last edited by 1tonchevy; 03-01-2011 at 05:45 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.