Gas Gauge Dead - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SS317 · 03-08-2011, 07:27 PM

Ok, I did a search and didn't find an answer.
My gas gauge was/is reading below empty.

Installed new sender from Classic Parts, everything went good, took about 3 minutes.

Gas gauge still shows empty, has not moved.

I followed the wire from the sender, under the seat over to the fuse box where it plugs into where it says "fuel"

Looked behind the gauge and double checked I installed the connector correctly when I took out the gauge cluster. I tried to follow the two wires from the gauge but they get lost in the cluster.

Where are these wires going? Shouldn't one be ground and the other hook to the sender?

03-08-2011, 07:27 PM	#1
SS317 Registered User Join Date: Dec 2010 Location: Fruita, Colorado Posts: 222	Gas Gauge Dead Ok, I did a search and didn't find an answer. My gas gauge was/is reading below empty. Installed new sender from Classic Parts, everything went good, took about 3 minutes. Gas gauge still shows empty, has not moved. I followed the wire from the sender, under the seat over to the fuse box where it plugs into where it says "fuel" Looked behind the gauge and double checked I installed the connector correctly when I took out the gauge cluster. I tried to follow the two wires from the gauge but they get lost in the cluster. Where are these wires going? Shouldn't one be ground and the other hook to the sender?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.