Wanting to bag truck but not lay frame questions

[SCOTI]

Originally Posted by Clyde65

Coils will be around $125.00/pr

Bags with cups and valves will be a little more, around $200.00 or so.

Check with the board vendors here, they will get you a great deal.

the thing that has held me back so far is I want to replace all the bushings and such at the same time. So getting all my $ upfront.

Scotti, would I need an adj panhard bar?

3 approaches possible: 1) modify the orignal bar to be adjustable; 2) modify the original bar only to re-center; 3) use an aftermarket adjustable bar.

I feel it is worth-while to do whatever it takes to ensure the Panhard bar goes from the frame all the way across to the pass side T/A (or pass side of the rear end housing). That can be accomplished by buying a new aftermarket adj bar, or by modifying your exiting bar. If you go through the effort to make the factory bar longer, you might as well make it adj too.... It REALLY helps installation & set-up ease.