84 Chevy C10 w/ 454 out of RV wont hold idle after swapping intake and carb.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gavinmosher · 03-29-2011, 09:02 PM

Hey guys i have a 84 chevy shortbed that has a 454 out of a winnebago, it ran decent before i swapped the stock carb and intake for a new aluminum one... i dont know if i got the distributor dropped back in right? but its acting weird

i marked the distributor rotor and where the vaccume advance was set on the valve cover, but it wouldnt drop back in that way any advice on that? and would timing cause it to start fine but not hold an idle at all?

03-29-2011, 09:02 PM	#1
gavinmosher Registered User Join Date: Feb 2010 Location: carthage missouri Posts: 81	84 Chevy C10 w/ 454 out of RV wont hold idle after swapping intake and carb.... Hey guys i have a 84 chevy shortbed that has a 454 out of a winnebago, it ran decent before i swapped the stock carb and intake for a new aluminum one... i dont know if i got the distributor dropped back in right? but its acting weird i marked the distributor rotor and where the vaccume advance was set on the valve cover, but it wouldnt drop back in that way any advice on that? and would timing cause it to start fine but not hold an idle at all?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.