Anyone running a 4spd and bench seat? pics of shift levers?

[2manyprojects]

Originally Posted by 70chevrolet

FYI. I know this is an old post.. But, there is no way you can run a bench seat with a Muncie m20 and a hurst comp plus shifter in these trucks. I am pretty sure hust does make a shifter for tri five Chevys that moves the handle forward two inches & that may work. But I read all these posts. Then I put a sbc350 with a Muncie m20 in my truck.. And I had to ditch the bench. It wasn't even close. Maybe if you notch the bench seat frame? Or maybe if you get a wicked small bench seat out of like a bratt. I ended up using abpair of junkyard buckets out of a Saturn..
Posted via Mobile Device

The tri five shifter works great. I have one somewhere I will take a pic when I get a chance. Unfortunately it has no linkage so it's useless.

Originally Posted by Stepside65

Hmm. I have a 350 with an sm420 behind it and have had no problem with my shifter clearance. The 350 is even all the way back to the point its almost touching the fire wall.
Posted via Mobile Device

The SM420 is a top loader truck trans. the car trans shifter bolts to the side of the tail shaft. and comes out under the front of seat.