62 SWB bed cross beams - The 1947 - Present Chevrolet & GMC Truck Message Board Network

53lowdown · 05-01-2011, 05:29 PM

I'm getting ready to reassemble my 62 SWB bed. I have 3 cross beams that are about 3 inches tall, the tailgate beam, then another beam that is only about 1 inch tall. Two of the three inchers go at the front of the bed on the frame mounts. Another 3 incher goes about a foot in front of the tailgate beam. Where does the 1 inch tall one go? There's about a 4 foot gap, and if I put it in the middle, it is right on top of the tire - which isn't going to work.

Can someone explain the spacing of the SWB crossbeams?
Thanks

05-01-2011, 05:29 PM	#1
53lowdown Junior Member Join Date: Feb 2005 Location: topeka, kansas Posts: 258	62 SWB bed cross beams I'm getting ready to reassemble my 62 SWB bed. I have 3 cross beams that are about 3 inches tall, the tailgate beam, then another beam that is only about 1 inch tall. Two of the three inchers go at the front of the bed on the frame mounts. Another 3 incher goes about a foot in front of the tailgate beam. Where does the 1 inch tall one go? There's about a 4 foot gap, and if I put it in the middle, it is right on top of the tire - which isn't going to work. Can someone explain the spacing of the SWB crossbeams? Thanks __________________ _______________________________________ 62 SWB BBW (under construction) 86 Vette Convertible



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.