Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-25-2011, 09:20 PM | #1 |
Registered User
Join Date: Jul 2008
Location: Boynton Beach, Fl
Posts: 103
|
Question about hidden bed strips
I purchased by bed sides from the vendor with polished angle strips, no holes, welded to the bed sides from the factory. Here is my question. If I went with the polished Hidden strips for the bed am I ok not to drill into the angle strips? I understand how they fasten in the strips and the angle are not set up to use the fasteners. I also see that hidden fastner angle strips are not an option.
So here is the dilema. Do I have to drill the holes in the sides and use a polished angle cover? Seems useless to have ordered the polished in the first place if so. Second, Am I ok to go with hidden and not attach the wood to the sides with fastners? I would just leave it under the strip in the groove and use the hidden everywhere else. Thanks in advance for the anticipated responses and pics. I could not wait to get an answer from the distributer in the morning!
__________________
One day I am going to finish this project! 1949 Chevy 1/2 ton |
Bookmarks |
|
|