OH WTB I need the Carb-Throttle Bracket for a 69-70 Kickdown Switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70cst** · 06-09-2011, 10:21 AM

Ok...
I am getting close to getting the Kick Down Switch installed but there is one minor detail

I need the Bracket that mounts to the carb which the switch mounts to... I hope I am saying this right. There were two styles for the 69-70 BB engines. I found a new repop bracket for $40 which is more than I want to spend...
If you have a bracket please post a pic so Fine69 can verify it's the carb bracket that I need. If you have one and fine69 says go...then I will be ready to roll

Thanks Again...we will evenually get the Circuit Rider back on the road

06-09-2011, 10:21 AM	#1
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,377	WTB I need the Carb-Throttle Bracket for a 69-70 Kickdown Switch Ok... I am getting close to getting the Kick Down Switch installed but there is one minor detail I need the Bracket that mounts to the carb which the switch mounts to... I hope I am saying this right. There were two styles for the 69-70 BB engines. I found a new repop bracket for $40 which is more than I want to spend... If you have a bracket please post a pic so Fine69 can verify it's the carb bracket that I need. If you have one and fine69 says go...then I will be ready to roll Thanks Again...we will evenually get the Circuit Rider back on the road __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 06-17-2011 at 09:05 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.