New look Glove Box Lid

[eightbanger]

Originally Posted by cjohnson6772

What clear coat did you use? I've heard some people say that clearing bare metal can discolor and leave a yellowish brown color.

Your right that can happen, I used Holts Dupli Color rattle can with Acrylic .

I've now done the ash tray and had already tackled the door panels at the same time as the glove box but wasn't going to post em as i'm not to happy with the end result....they had rusted and were damaged on the outer edges and corners, even with a massive amount of grinding and sanding the pitting was too deep.

Anyway here they are for what they're worth.