New Need Help!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dtaylo22 · 07-31-2011, 11:21 PM

I am new to this forum and square body trucks. I have an 83 c10 SB that I am about to lower with Mcgaughy's 4/6. Spindles and springs in the front and flip in the back. The problem that I am running into is in the front. I want to run a 15inch rim and currently the ones that i have on my truck are the stock rally rims which are 15x8 with a 41/2 Back Spacing. I was told that I will not be able to run this as it will rub on control arms. I have seen alot of 73-87 running 15s, want to know the best thing to do to make it work. Should I go to 15x7 or 15x 6 with different back spacing or what would be the best?

07-31-2011, 11:21 PM	#1
dtaylo22 Registered User Join Date: Jun 2011 Location: Phoenix Arizona Posts: 4	New Need Help!!! I am new to this forum and square body trucks. I have an 83 c10 SB that I am about to lower with Mcgaughy's 4/6. Spindles and springs in the front and flip in the back. The problem that I am running into is in the front. I want to run a 15inch rim and currently the ones that i have on my truck are the stock rally rims which are 15x8 with a 41/2 Back Spacing. I was told that I will not be able to run this as it will rub on control arms. I have seen alot of 73-87 running 15s, want to know the best thing to do to make it work. Should I go to 15x7 or 15x 6 with different back spacing or what would be the best?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.