Side Window Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lobo'74 · 08-06-2003, 03:41 PM

Looking at what needs to be done to my '67. All the saide window rubber, felt, etc needs replacement. It opening up the door and looking inside I found surface rust on the regulator mechanism and rust on the channel the window sits in. I saw two regulators on e-bay, but the channel the window sits in was not in the picture. Is that part of the regulator assembly or is it attached to the glass? I think mine needs replacement (it is starting to exfoliate and flake off) but don't know what part to look for.

Anyone done this?

Thanks.

08-06-2003, 03:41 PM	#1
Lobo'74 Registered User Join Date: Nov 2002 Location: Charlottesville, VA Posts: 404	Side Window Question Looking at what needs to be done to my '67. All the saide window rubber, felt, etc needs replacement. It opening up the door and looking inside I found surface rust on the regulator mechanism and rust on the channel the window sits in. I saw two regulators on e-bay, but the channel the window sits in was not in the picture. Is that part of the regulator assembly or is it attached to the glass? I think mine needs replacement (it is starting to exfoliate and flake off) but don't know what part to look for. Anyone done this? Thanks. __________________ "Truck" '67 small window '79 350 .030 over, LT1 "clone"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.