1966 bench seat switch- - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RoyL** · 08-09-2011, 06:55 AM

This article http://chevtruckseatswap.blogspot.co...blog-post.html
says "the console brackets will have to be trimmed slightly to fit over the hump."

Based on others I have "talked" to, there were pretty heavy mods needed to the console bracket.

It appears that even with mods to the brackets, the center console seat section may not “squeeze” together enough for both seats to sit on the flat part of the floor . . . It looks like I need about 2 inches for the feet of the seat tracks to sit flat.

Any of you Suburban guys used these seats?

Thanks,
Roy

08-09-2011, 06:55 AM	#23
RoyL Senior Member Join Date: Aug 2010 Location: HSV, AL Posts: 292	1999-2005 Silverado Seats in a 1965 Suburban?? This article http://chevtruckseatswap.blogspot.co...blog-post.html says "the console brackets will have to be trimmed slightly to fit over the hump." Based on others I have "talked" to, there were pretty heavy mods needed to the console bracket. It appears that even with mods to the brackets, the center console seat section may not “squeeze” together enough for both seats to sit on the flat part of the floor . . . It looks like I need about 2 inches for the feet of the seat tracks to sit flat. Any of you Suburban guys used these seats? Thanks, Roy __________________ 1965 Suburban Waiting on Time and Money



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.