Does the 400 trans have a port to plug in a trans temp gauge? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slowtruk · 09-06-2011, 10:11 PM

Guys, I am installin a coole on my trans, and already have all that figured out, What Ineed to know is, is there a port on the side of the 400trans so I can screw in the sensor for a trans temp gauge and then run my wire to it? Like this one...

http://www.summitracing.com/parts/ATM-4357/

If not, I could install one inline in the rubber hose AFTER its went through the radiator and cooler, right? But which gauge kit would I buy?

Thanks a lot guys

09-06-2011, 10:11 PM	#1
Slowtruk Registered User Join Date: Aug 2011 Location: Lumberton Texas Posts: 378	Does the 400 trans have a port to plug in a trans temp gauge? Guys, I am installin a coole on my trans, and already have all that figured out, What Ineed to know is, is there a port on the side of the 400trans so I can screw in the sensor for a trans temp gauge and then run my wire to it? Like this one... http://www.summitracing.com/parts/ATM-4357/ If not, I could install one inline in the rubber hose AFTER its went through the radiator and cooler, right? But which gauge kit would I buy? Thanks a lot guys __________________ IBEW Electrician-Nick 1985 C20 Silverado 1965 C-10 short fleet 1961 c-10 Apache short fleet 2005 Chevy Suburban LT 2012 Hyundai Sonata



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.