My wife's 2WD Blazer pics... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 08-15-2003, 12:06 PM

We used 2 1/2 spindles and 3 inch springs. Actually we sandblasted and painted the Rally wheels, and when we installed them, the fronts were really too wide. The spindles widened the front track about 1/2 per side. We wound up blasting and painting a 7 inch wide rally for the front. The backs are 8 inch pickup rallys and the fronts are 7 inch van rallys.

When she gets home tonight, I'm going to have her find the reciept for the suspension parts. It's been 3 years, and I'm feeling like my memory is flaky. If the above is wrong, I'll post later tonight with the correct stuff.

08-15-2003, 12:06 PM	#26
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	We used 2 1/2 spindles and 3 inch springs. Actually we sandblasted and painted the Rally wheels, and when we installed them, the fronts were really too wide. The spindles widened the front track about 1/2 per side. We wound up blasting and painting a 7 inch wide rally for the front. The backs are 8 inch pickup rallys and the fronts are 7 inch van rallys. When she gets home tonight, I'm going to have her find the reciept for the suspension parts. It's been 3 years, and I'm feeling like my memory is flaky. If the above is wrong, I'll post later tonight with the correct stuff. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.