Where to mount front e-level sensors on '68 dropmembered C10?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

funkytechmonkey · 10-04-2011, 01:18 PM

I found a place to mount the rear... but I have no idea where to mount them on the front.

The biggest issue I am coming across is that my drop member, upper and lower control arms are already powder coated. So I dont want to weld anything to them. I dont mind drilling a hole but welding is not an option. Although I can weld on the frame... its painted.

Here are some pics of the rear. I welded a 16 guage plate inside the frame and mounted the sensor to it.

Now I just need to figure out the front. If you have pics of where you mounted yours i would be GLAD to see them.

10-04-2011, 01:18 PM	#1
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Where to mount front e-level sensors on '68 dropmembered C10?? I found a place to mount the rear... but I have no idea where to mount them on the front. The biggest issue I am coming across is that my drop member, upper and lower control arms are already powder coated. So I dont want to weld anything to them. I dont mind drilling a hole but welding is not an option. Although I can weld on the frame... its painted. Here are some pics of the rear. I welded a 16 guage plate inside the frame and mounted the sensor to it. Now I just need to figure out the front. If you have pics of where you mounted yours i would be GLAD to see them. Attached Images __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.