What Oil Pressure sender For Lsx swap? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lapaipaxxx · 10-24-2011, 07:34 PM

I have a 1986 silverado 6.0/4l80e with a 1990 suburban cluster. Using the trucks stock sender the oil guage will read past 60psi. Tried swapping it with new sender but does same thing. Question is, should i use 1990 sender? I currently have stock sender next to oil pan, drilled and tapped oil cooler lines block.

curent sender

1990 sender

if i need 1990 sender how would i go by connecting it. Since it has a 3 wire pigtail.
Thanks,
Jesse

10-24-2011, 07:34 PM	#1
lapaipaxxx Registered User Join Date: May 2010 Location: brownsville,tx Posts: 26	What Oil Pressure sender For Lsx swap? I have a 1986 silverado 6.0/4l80e with a 1990 suburban cluster. Using the trucks stock sender the oil guage will read past 60psi. Tried swapping it with new sender but does same thing. Question is, should i use 1990 sender? I currently have stock sender next to oil pan, drilled and tapped oil cooler lines block. curent sender 1990 sender if i need 1990 sender how would i go by connecting it. Since it has a 3 wire pigtail. Thanks, Jesse



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.