Loose Hub Nuts - GM 10 bolt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*JCampbell* · 12-04-2011, 04:41 PM

'88 K20 Suburban

Back in September, I noticed that my driver's side wheel had a shimmy in it. Traced it back to a loose hub nut. Tightened the nut (torqued till wheel wouldn't spin, backed off a touch, then sucked up the "lock nut"), and buttoned it all up. The passenger side was the slightest bit loose, so I did the same thing on that side.

Jacked the truck up to R&R the brakes, and I noticed the driver's side is loose again. Passenger side is still tight. Something doesn't seem right.

Any thoughts?

12-04-2011, 04:41 PM	#1
JCampbell Account Suspended Join Date: Apr 2008 Location: Hesperia, Ca Posts: 1,332	Loose Hub Nuts - GM 10 bolt '88 K20 Suburban Back in September, I noticed that my driver's side wheel had a shimmy in it. Traced it back to a loose hub nut. Tightened the nut (torqued till wheel wouldn't spin, backed off a touch, then sucked up the "lock nut"), and buttoned it all up. The passenger side was the slightest bit loose, so I did the same thing on that side. Jacked the truck up to R&R the brakes, and I noticed the driver's side is loose again. Passenger side is still tight. Something doesn't seem right. Any thoughts?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.