86 squarebody made2drag

[made2drag]

as of right now, i can stand on the rear bumper and the axle touches frame.

after the notch is welded and i cut the rest of the bottom of the frame off on each side, i should be touching the top of the notch. if i step notch it, i'm going to make a 3 inch lowering block out of 2x3 square tubing and my axle should be thru the frame all the way.

i have some 9000 sleeve airbag brackets to mount on the frame and leaves
... and i still need to mount some shocks.

the truck rides pretty much like stock in the front and the rear isnt as bouncy as i thought it would be since i dont have shocks...well, thats probably going to be it for a couple of weeks, i'll post some pics when i get the bed on........