Lighting Problem. Specific ground? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Your41Plague12 · 12-08-2011, 09:16 PM

Ok guys, another electrical gremlin for you. I recently had the front clip off my truck to replace the engine (it sits too high for the hoist to pick an engine without doing so). Now, when my high beams are engaged they don't work and one of the low beams goes out as well. The indicator light doesn't work anymore either. My dome light also quit working. Turn signals, marker lights, and low beams work just fine. Is there a specific fuse or ground to check? This one has me stumped. Thanks!

Steve

12-08-2011, 09:16 PM	#1
Your41Plague12 Registered User Join Date: Dec 2010 Location: Pittsburgh, PA Posts: 1,009	Lighting Problem. Specific ground? Ok guys, another electrical gremlin for you. I recently had the front clip off my truck to replace the engine (it sits too high for the hoist to pick an engine without doing so). Now, when my high beams are engaged they don't work and one of the low beams goes out as well. The indicator light doesn't work anymore either. My dome light also quit working. Turn signals, marker lights, and low beams work just fine. Is there a specific fuse or ground to check? This one has me stumped. Thanks! Steve __________________ Steve Member of the Foot Pedal Club '83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL, Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws, 350 HP 350 crate engine from Jegs, Turbo 400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.