how much notch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tubbedII · 02-01-2012, 05:57 PM

If you get the CPP bolt in notches, they have an adjustable bump stop on them that you can set so the pumpkin won't hit the floor. I took out the bump stops and cut a hole in the floor for the pumpkin to come through...it's under the seat so no one can see it.

As for laying and keeping a back seat, it's usually not the stock rear bench they are using and it's pushed really far forward to it's not so tall.

The best one I've ever seen with a stock bench in the stock location is gringoloco's previous rig. It doesn't lay frame but gets an awesome stance:
http://67-72chevytrucks.com/vboard/s...d.php?t=264654

02-01-2012, 05:57 PM	#5
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: how much notch If you get the CPP bolt in notches, they have an adjustable bump stop on them that you can set so the pumpkin won't hit the floor. I took out the bump stops and cut a hole in the floor for the pumpkin to come through...it's under the seat so no one can see it. As for laying and keeping a back seat, it's usually not the stock rear bench they are using and it's pushed really far forward to it's not so tall. The best one I've ever seen with a stock bench in the stock location is gringoloco's previous rig. It doesn't lay frame but gets an awesome stance: http://67-72chevytrucks.com/vboard/s...d.php?t=264654 __________________ 1970 2wd Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.