4L60E Neutral Safety Switch

[rmvlt1100]

I have a 4L60E transmission and the switch on the gear selector only has 1 big connector instead on 2 connectors. I was hoping that someone has an idea on which wires are used for the Neutral Safety Switch and what wires are used for the reverse light. I have 5 wires (of the around 10 wires that are on the connector) that come from the switch , 2 pinks, 1 gray, 1 light green and 1 dark green wire. Any info would be great. These are the last wires that need to be connected. I attached a picture of the switched that I have.

Thanks in advanced, Robert