IN Tilt Column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dave** · 02-18-2012, 01:58 PM

I removed this from an early 80s motor home camper. This is very close to a truck tilt and would make a good candidate for conversion. The shaft is the correct length. The shift tube lever has an offset in it and the neutral switch would need moved. T/s switch has the rectangular plug instead of the semi circle, you'll probably want to replace it.

The shift lever arm has good chrome and the shift bowl is in good shape not worn out like a lot are.

T/s housing has a bump on it, look at the pic. Lastly, I'm including the the cruise control t/s lever with as well.

200.00 Shipped CONUS.

02-18-2012, 01:58 PM	#1
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,400	Tilt Column I removed this from an early 80s motor home camper. This is very close to a truck tilt and would make a good candidate for conversion. The shaft is the correct length. The shift tube lever has an offset in it and the neutral switch would need moved. T/s switch has the rectangular plug instead of the semi circle, you'll probably want to replace it. The shift lever arm has good chrome and the shift bowl is in good shape not worn out like a lot are. T/s housing has a bump on it, look at the pic. Lastly, I'm including the the cruise control t/s lever with as well. 200.00 Shipped CONUS. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.