TX Small block pulleys and brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevytruckluver · 02-19-2012, 08:58 PM

here is a set of pulleys and brackets from a 350 engine. This was removed from a 71 with a short water pump. The picture shows alt and p/s pump and a/c compressor, these are not included just the pulleys and brackets. The truck had headers and the P.O. had removed the rear a/c bracket so I do not have that one.
75 plus the shipping for the brackets and pulleys
If you need the p/s pump or alt. or compressor, let me know I may start another post with those if there is any intrest.

02-19-2012, 08:58 PM	#1
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Small block pulleys and brackets here is a set of pulleys and brackets from a 350 engine. This was removed from a 71 with a short water pump. The picture shows alt and p/s pump and a/c compressor, these are not included just the pulleys and brackets. The truck had headers and the P.O. had removed the rear a/c bracket so I do not have that one. 75 plus the shipping for the brackets and pulleys If you need the p/s pump or alt. or compressor, let me know I may start another post with those if there is any intrest. Attached Images __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.