ME 4x4 front shaft, plug and play in the mud! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC AMI · 03-25-2012, 10:52 AM

Super clean 4x4 front shaft low miles. 25 inches closed and 28 1/4 inches opened up from center of front u-Joint bearing to center of u-joint shaft rear bearing. I had a shaft worked on , not this one and it set me back 100.
So I want 65 bucks plus the ride for this one. An old guy most likely never used 4x4 as every bearing is tight and the shaft slides freely open and closed
with 0 slop. I will

if I break any now when it is sold. Money back, I am that confident you will like this shaft.

03-25-2012, 10:52 AM	#1
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	4x4 front shaft, plug and play in the mud! Super clean 4x4 front shaft low miles. 25 inches closed and 28 1/4 inches opened up from center of front u-Joint bearing to center of u-joint shaft rear bearing. I had a shaft worked on , not this one and it set me back 100. So I want 65 bucks plus the ride for this one. An old guy most likely never used 4x4 as every bearing is tight and the shaft slides freely open and closed with 0 slop. I will if I break any now when it is sold. Money back, I am that confident you will like this shaft. Attached Images __________________ 1968 Chevy 4x4 307 4 speed Last edited by GMC AMI; 04-07-2012 at 11:23 AM. Reason: Price



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.