Bought my old K5 back, now receiving a 5.3 swap... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ford Assassin · 05-08-2012, 01:34 PM

Got the 14 bolt pulled and sold. Went ahead and pulled the 4l80e and NP208c transfer case too. Dropped the 4L80e off at my trans shop to be converted to 2wd. I also bought a poly urethane A-arm bushing kit, ball joints, calipers, rotors, ceramic pads, brake hoses, pitman arm, and steering box for the front end rebuild (mostly from RockAuto).

Burned out the old bushings last night, still need to remove the bushing 'cups'. I plan on getting the 5.3 pulled today and start on removing the rear 4x4 spring hangers to replace them with the 2wd versions.

Pics as requested:

05-08-2012, 01:34 PM	#20
Ford Assassin Registered User Join Date: Jun 2008 Location: Jackson, Ca. Posts: 674	2wd Conversion Progress Pics..... Got the 14 bolt pulled and sold. Went ahead and pulled the 4l80e and NP208c transfer case too. Dropped the 4L80e off at my trans shop to be converted to 2wd. I also bought a poly urethane A-arm bushing kit, ball joints, calipers, rotors, ceramic pads, brake hoses, pitman arm, and steering box for the front end rebuild (mostly from RockAuto). Burned out the old bushings last night, still need to remove the bushing 'cups'. I plan on getting the 5.3 pulled today and start on removing the rear 4x4 spring hangers to replace them with the 2wd versions. Pics as requested: Attached Images __________________ Cable -K5 Blazer 2wd: 6.0 LQ4, 7875 Turbo, Tick Stage II Turbo Cam, Built 4L80e, RevMax Billet 3600, 9.5" 14 Bolt -Chevy 3+3 Crew Cab Dually: Cummins 12v P-Pump Swap, Compound Turbos, A2W Intercooler, NV4500HD, 4wd conversion, Radius Arms, Coilovers, Crossover Steering, etc Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=803608



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.