CA Blazer Hatch or parts

[Fesser]

I have a Blazer hatch that has some damage. The worst is a chunk taken out on the inside bottom edge near the center. Looks like it could easily be fixed and doesn't look like it would hurt the structural integrity. There appears to be a crack around the inside corner of the right side (viewing it with it laying on the ground interior side up) around the are where the latch mechanism is. Don't know how bad that might be. The whole thing appears to have been painted with latex paint so it is hard to tell. There are also a couple of cosmetic chips on the outside fiberglass. I don't see any cracks around the hinges. The latch handle is ugly with scratches and peeling in the cthrome. No key. Struts work properly as does the latch assembly. I will sell the whole hatch and the hardware shown (missing a couuple of the cover plate screws) for 225.00 plus shipping (almost certainly has to go Greyhound and I will have to crate it to some degree). This needs some work but is certainly not beyond repair.

Or... I will strip every piece of hardware off it, latches, rods, hinges (which are sloppy) struts, etc. and sell that for 120.00 shipped.

Obviously, if someone says they will take the hatch, then I won't be selling the hardware. If someone takes the hardware, what is left of the hatch might be for sale (depends a lot on what I have to do to get the hardware off).

Thanks, Frank (in Napa, CA)