LY5 + 4l60e power option ? and install ?

[laynrockers]

I have a Ly5 and rebuilt 4l60E on hold with Spalding Auto. For those not familiar they sell take out motors. This particular one had only 27,000 miles on it and the 4l60e is rebuilt by them. I went this route for the warranty and they do all the ecu tcu tuning, and harness, delete vats security feats ect. So when it arrives it is ready to drop in and fire. Since i am not very familiar with rebuilding these like most of you i chose this route.

Truck is a 66 c-10 LWB SBW.

I need help identifying all the other parts i will need to drop this motor in. I already have the motor mounts, transmission crossmember.

Can you all please help to steer me in the direction of what else I will need, what kind of shifter cable will work. I know I have seen a few use lokar. anything else ?? I will also need a new pan since My truck has a full PB kit.

I went with this motor for the AFM (active fuel management) but would be interested in a possible CAM swap and bolts on (new intake mani if it helps with the cam) anyone have documented or dyno runs with these improvements or any suggestions on CAM and mani??

Thanks fellas