Have some questions.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**scotts62** · 08-26-2012, 08:19 PM

Ok so i am working on my harness to make a stand alone and i ran across a couple things.. The engine i have is out of a '04 and the harness is an '05 and i was looking to run the wires under the intake and saw that it doesnt have knock sensors in the plate under the intake..? And does it need them or can it be programmed without?

And the same with the 02 sensors, was reading up on it and some run them and some dont, what did you do?

Another, im running the wired throttle and is there a harness that goes from the pedal to the TAC module? I got the inside and out harness but cant find the plugs to plug into the pedal and the TAC for the life of me

Thanks

08-26-2012, 08:19 PM	#1
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Have some questions.. Ok so i am working on my harness to make a stand alone and i ran across a couple things.. The engine i have is out of a '04 and the harness is an '05 and i was looking to run the wires under the intake and saw that it doesnt have knock sensors in the plate under the intake..? And does it need them or can it be programmed without? And the same with the 02 sensors, was reading up on it and some run them and some dont, what did you do? Another, im running the wired throttle and is there a harness that goes from the pedal to the TAC module? I got the inside and out harness but cant find the plugs to plug into the pedal and the TAC for the life of me Thanks __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.