PS Pulley wobble

[Belairbob]

Ths is a PS pulley, the type that is held on by a nut, that had a wobble in it. I firgured I had nothing to lose so I took a 5/8" steel dowel and removed enough of the wobble to be acceptable for my use. The pump was mounted to my engine so I would mark the wobble as it turned on the pump and then use the dowel, holding the pulley on a flat surface with my feet, to move it a bit. I didn't get to rough with it. Tried not to bend the leaves with my weight. I guess there is a point were you could go to far and do further damage. Like I said I had nothing to lose but time and this method looks a litle crude but helped in my case.