Another VintageAir install question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell Ashley · 09-22-2012, 04:31 PM

My truck was originally a six cylinder but now has a 350 with the radiator support in the original six cylinder position. My VA condensor and hose kit is designed for a TF with this configuration. Did anyone who has installed this setup have a problem with the condensor fitting per the instructions? If so, how did you resolve it? Did you remove the X brace from the radiator support?

I called VA tech support but they are closed on Saturday so I thought I'd try here since seveal folks here on the forum have VA installs.

09-22-2012, 04:31 PM	#1
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,648	Another VintageAir install question. My truck was originally a six cylinder but now has a 350 with the radiator support in the original six cylinder position. My VA condensor and hose kit is designed for a TF with this configuration. Did anyone who has installed this setup have a problem with the condensor fitting per the instructions? If so, how did you resolve it? Did you remove the X brace from the radiator support? I called VA tech support but they are closed on Saturday so I thought I'd try here since seveal folks here on the forum have VA installs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.