71 2wd conversion project

[fxdxharley]

Ok here is the measurements i got. 12 3/4" from top right p.s. bolt hole to front control arm mount bolt at base. 16" from same p.s. hole to back motor mount bolt. see picture with red lines. all measurements are center to center. *note that i drew the line to the end of the bolt but measured it to the base*.
also i took a measure ment from the rad suport mount center to the top left bolt that mounts the cross member to frame, 23 3/8". I have more pictures with the tape meaure in view if you want them. also of the rear air bag mount plate. if you want them i can post those tonight from home. this was all done to the frame before i got it. let me know if you need anything else.