|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
10-05-2012, 05:02 PM
|
#10 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: 2000 Blazer console install
OK console is in and working. I used the B&M shifter cable for right now though didn't get the cable when I got the console. Will pick one up Monday I hope. With the B&M cable the gears are off because the hard mount for the cable is shorter than a stock cable.
Green/Black wire is hot for the brake solenoid power so it's hooked up to a ignition switched power with a anti theft switch hidden in line. Gear shifter lights work in all positions. I have to find a On/Off switch to fit the Tow/hauling switch that is a momentary switch, it's square behind the shifter. This is going to be my torque converter switch when done. I have a toggle switch as of now on the dash. If anyone knows of such switch please LMK. I want a factory switch to fit the opening if possible.    
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
| Bookmarks |
|
|
Threaded Mode