Questions on crate engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CRGRS 66 · 10-11-2012, 12:38 PM

I am looking at this 350 crate engine for my 66C10 (currently original 283).

http://www.jegs.com/i/Chevrolet+Perf...67353/10002/-1

Sorry purists, but rebuilding the 283 will just be way too many $$$.

I am also adding a camaro 5spd with S10 tail section and I want to keep my original bell housing.

My question is: Can I use my existing flywheel and clutch set up? I plan to replace the flywheel and clutch, but I want to be sure I order the right parts.

Maybe should have posted this in the engine drive train board, but I know you guys look here every day, and you guys are always spot on with your advice.

Thanks in advance.

10-11-2012, 12:38 PM	#1
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Questions on crate engine I am looking at this 350 crate engine for my 66C10 (currently original 283). http://www.jegs.com/i/Chevrolet+Perf...67353/10002/-1 Sorry purists, but rebuilding the 283 will just be way too many $$$. I am also adding a camaro 5spd with S10 tail section and I want to keep my original bell housing. My question is: Can I use my existing flywheel and clutch set up? I plan to replace the flywheel and clutch, but I want to be sure I order the right parts. Maybe should have posted this in the engine drive train board, but I know you guys look here every day, and you guys are always spot on with your advice. Thanks in advance. __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.