|
12-10-2012, 08:05 PM
|
#1 |
|
Registered User
Join Date: Sep 2012
Location: clearmont mo.
Posts: 75
|
trans question?
I know this has been discussed in length and I have looked through several threads on here and other sites but can't quit get an answer. I did a 6.0 swap and used a 98 trans from a 5.7sbc, I ordered a ls bellhousing and changed it and my 6.0 had a spacer and 80e flexplate that I ground out the holes for, but when I put it all together it seemed like the converter had to pull forward a lot, jus seems like its to far forward out of the pump now, can the bellhousings have a different dish to them? I don't want to start it and ruin a new trans and converter. If anyone has any info please let me know, if I don't have to take the trans back out I don't want to. Thanks
Posted via Mobile Device
__________________
Dan G  Lift it, fat chicks cant jump! 83 Chevy shortbed 4x4: 6.0 ls powered 97 Chevy 3/4 ton ex cab 454: work horse 00 Chevy camaro: daily driver 83 Chevy 3/4 ton: dads old rig |
|
|
| Bookmarks |
|
|
Threaded Mode