msd 6al ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fast71 · 11-01-2003, 07:27 PM

Me and a friend are building a s10 with a small block well we were going to fire the motor a little while ago but we're not getting fire . we ran the test that is in the directions of the 6al box and got no results which by them means the box is bad . I pulled the dist. out and turned it by hand . I can hear the boxed making a clicking noise but no signal at the neg. side of the coil.
with the ing. switch on I have power at the pos.side of the coil and a constant ground at the neg side of the coil ,even when spinning the dist. . I thought the neg side was a pulse side . Does anyone have any Ideas?
Thanks
Brian

11-01-2003, 07:27 PM	#1
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	msd 6al ? Me and a friend are building a s10 with a small block well we were going to fire the motor a little while ago but we're not getting fire . we ran the test that is in the directions of the 6al box and got no results which by them means the box is bad . I pulled the dist. out and turned it by hand . I can hear the boxed making a clicking noise but no signal at the neg. side of the coil. with the ing. switch on I have power at the pos.side of the coil and a constant ground at the neg side of the coil ,even when spinning the dist. . I thought the neg side was a pulse side . Does anyone have any Ideas? Thanks Brian __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.