INSTALL: Tennman's Sidemarker Fuel Fill on a Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jorgensensc · 11-17-2003, 12:21 AM

Finally got around to showing the install! I hope this helps everyone. There are alot of pics, so it might take awhile to load them all.

Here is what I used:

1- 1997 S10 fuel filler door with neck
1- 1 1/2 fuel filler hose (see blazer tank install for part number)
3 ft of 5/8" hose
4- 1/4" machine threaded bolts 1 1/4" long
4- nylon lock nuts for above bolts
2- 1/2" spacers for above bolts
1- permacap gas cap (optional)
1- large can of patience!!!

Here are the parts I got from the local wrecking yard:

11-17-2003, 12:21 AM	#11
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	INSTALL: Tennman's Sidemarker Fuel Fill on a Stepside Finally got around to showing the install! I hope this helps everyone. There are alot of pics, so it might take awhile to load them all. Here is what I used: 1- 1997 S10 fuel filler door with neck 1- 1 1/2 fuel filler hose (see blazer tank install for part number) 3 ft of 5/8" hose 4- 1/4" machine threaded bolts 1 1/4" long 4- nylon lock nuts for above bolts 2- 1/2" spacers for above bolts 1- permacap gas cap (optional) 1- large can of patience!!! Here are the parts I got from the local wrecking yard: Attached Images __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.