double drop on torque convertor

[SS Tim]

Detach the upper line at the radiator cooler. Place a catch can for the trans. end of both lines. Flush with brake clean or parts wash. A dedicated trans. wash is also a good idea. In any case follow up the cleaner application while wet with a rubber tip air nozzle. Blow out both the return line and the cooler/feed line combination into the catch bucket from that one point at the upper radiator cooler fitting. When I do this I follow up with a slug of trans. fluid and blow that through too. Then hook the lines back up but only after you know clean clear fluid is coming out both lines.