Alternative to Bed Mounting Pads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

andsonsvd · 05-12-2013, 10:34 AM

I fitted a Underbed Fuel Tank? to my 1958 Chev Fleetside. When I put the Bed back on the bed cross member didn't clear to fitting on the tank. I emailed the supplier and they said it was because I didn't have any bed mounting pads and this is why it didn't clear.

Does anyone know if this sounds right? can i just use standard rubber rather than the actual Bed Mounting Pads? If I can use standard rubber what thickness would I use?

I really appreciate all of the help it is hard in Australia to get advice this website is a godsend for me!

Thanks Shane

05-12-2013, 10:34 AM	#1
andsonsvd Registered User Join Date: Dec 2011 Location: Perth Western Australia Posts: 146	Alternative to Bed Mounting Pads I fitted a Underbed Fuel Tank? to my 1958 Chev Fleetside. When I put the Bed back on the bed cross member didn't clear to fitting on the tank. I emailed the supplier and they said it was because I didn't have any bed mounting pads and this is why it didn't clear. Does anyone know if this sounds right? can i just use standard rubber rather than the actual Bed Mounting Pads? If I can use standard rubber what thickness would I use? I really appreciate all of the help it is hard in Australia to get advice this website is a godsend for me! Thanks Shane __________________ Australian GM/Holden Dealer 1937 Chev Rod - LS1/4L60E 1949 Chevy 4400 Dually - 235ci/4L60E 1958 Chevy Apache Fleetside SBC/T400



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.