stall torque converter recommendation

[frankdatank01]

Gents,

While I have a inquiry to TCI on a stall recommendation, I thought I would pose the question to you fine folks also. Looking for a stall recommendation for torque converter. Here are the details:

1970 Chevy C10 2WD LWB
20" rims (tire diameter 30")
Weight: ? 3800 lbs ?
Looking at TH400 Automatic with external cooler
Rear Axle Gear Ratio: 3.08
Engine: New ZZ4 350
Cam Duration 208 degree intake / 221 degree exhaust
Compression: 9.9:1
Listed HP: 355 at 5200
Listed Tq: 320 at 2000, 350 at 2500, 375 at 3000, 400 at 3500, 375 at 4000

Looking for street driven ride that will move around town very well and still behave going down the highway. (While I would like to mod for 700R4, I more concerned with getting on the road after 6 years...)

What are your thoughts on stall? 2000, 2400....

Any recommendations for local SW Ohio transmission shop or a good online trans shop. Nothing to rebuild, looking for a ready trans/converter.

Thanks in advance!

Frank the Tank