Working on the Fauxtina - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nele22 · 06-29-2013, 04:34 PM

About a year ago I decided that the truck needed to go to bare metal. Due to other things I put the project off until last week. I have started working on it and will keep updating with pictures.

The first coat is a flat black primer. Second is a few coats of Red Oxide primer. I am finishing it off with Satin White. The plan is to wet sand the whole truck with 600 grit. This will give a nice smooth finish and a weathered look. In the obvious spots of wear I will take most of the white and expose the red oxide and black.

Stay tuned.

06-29-2013, 04:34 PM	#1
nele22 Registered User Join Date: Aug 2012 Location: Ashland Posts: 124	Working on the Fauxtina About a year ago I decided that the truck needed to go to bare metal. Due to other things I put the project off until last week. I have started working on it and will keep updating with pictures. The first coat is a flat black primer. Second is a few coats of Red Oxide primer. I am finishing it off with Satin White. The plan is to wet sand the whole truck with 600 grit. This will give a nice smooth finish and a weathered look. In the obvious spots of wear I will take most of the white and expose the red oxide and black. Stay tuned.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.