Frame Reinforcement

[byates2]

I had to cut some of the frame to fit the headers i chose to put on the engine. I also had to cut a hole in the crossmember to fit em. I'm wondering how i can reinforce the frame without having to weld. I want to get some strips of heavy duty stainless and bolt them with grade 8 bolts. I want to get strips and bolt them above and below the hole in the crossmember and one on the frame where to deepest cut is..... any other ideas. i want to stay away from welding because i dont have the means or a way to do it. I'm hoping its possible to do without having to weld