Blaster Abrasive Breakdown and Vacuum failure

[ETsC10]

Here’s a tip from the website of a company called Skat Blast, a media supplier...and a good tip it is!

“Regardless of which abrasive you use, change abrasive on a regular basis,
as visibility problems inside a closed cabinet will increase as the abrasive breaks down in
consistency. Once the abrasive breaks down to a consistency of a fine powder, the fine
particles will pass through most vacuum bags or cartridges, resulting in failure of the vacuum or
dust collector motor, and often blowing dust into your shop. It is not economical to
blast with worn out abrasive and doing so is one of the chief causes of vacuum motor failure.”