Wire hook up question

[jbgroby]

Ok I have two wire left to tie in under the hood one is marked solinoid power and is a heavy wire. The other is marked ignition switch start. In looking at the solinoid, the heavy wire with connector is the positive going to the battery. The purple wire is simply cut off from the original tear down and goes to nothing(next to the block). The small wire behind the heavy one is white and the same, just cut off (I forgot to mark what was what years ago). From looking at the picture can you tell which small post is supposed to go for what?

I took two pictures onw with the pos. cable attached and one with out.