The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1973-1987 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-03-2003, 02:10 PM   #1
CUCVFAN
Registered User
 
Join Date: Dec 2003
Location: Jarrettsville, MD
Posts: 5
FS: 81-87 (up to 91 CC) Dually Conversion Parts

I have almost every part needed to convert an 81-87 C/K30 (or even C/K20), or 81-91 Crew-Cab GMC or Chevy to dually. Some parts are used, some NOS, but all are very nice. Here's what I have:

-Used Dana 70HD rear axle w/ 4.56 gears. Came out of a truck w/ 14,000 original miles on it. Very clean. Very stout.
-Used front hub extensions. These bolt to the studs of the existing spindles/hubs. They are currently on a 4wd (will be removed very shortly), but should also work fine for a 2wd.
-NOS rear dually fenders, marker lights, wiring harnesses, hardware and templates for mounting the fenders. Some small bolts/washers may be missing, but most of it is here in plastic bags.
-NOS rear sway bar, link ends, brackets, bushings, spring plates, etc... Most bolts for this as well
-Used U-bolts. Need a wire brushing, but very usable.
-NOS proportioning valve for regular cab K30

What you will still need (that I know of):
-Have your driveshaft lengthend/shortened, depending on the truck.
-The correct proportioning valve, if the truck is not a regular cab, K30.
-Re-use your hard metal brake lines from your existing rear (or make new ones).
-Set of dually wheels/tires

The used parts all came from the same 1987 Chevy, but can probably be used on 73-80 models as well. No guarantee on that, though....

Asking $1000 for everything (the fenders alone are over $800 new, if you can even find them new)

The parts are located near Baltimore, MD. The rear is in a crate already and the fenders and all other parts will be in another crate. I can drop them off at a local shipping terminal to save a "pickup" charge for the buyer. Total weight is about 800lbs.

I will try to post some pics here or a link to some pics shortly.
__________________
1988 Chevy V30 Crew Cab SRW 4x4, 6.2L, TH400, 4.10's
1987 Chevy M1028A3 CUCV Dually
CUCVFAN is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:07 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com